Transmission not going in reverser - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Transmission not going in reverser

Heli CPYD25 TY2

Hello!
I am working on a Heli LP lift truck model CPYD20-TY with a GM 3.0L engine and the transmission will not engage into reverse. I hear back up alarm come on but to action from trany. I replaced the solenoid valve that sits on top of transmission valve body because someone else has previously ordered it, but it did not make a difference. Trouble i have is that i have no info on the transmission or schematic for elec. circuit related to it.
Fist question is if anyone can share any info needed, and secondly, any ideas what may be causing failure?
Thanks.

Posted 21 Sep 2023 12:11
By Vic_Lozan
joined 21 Sep'23 - 1 message
Virginia, United States

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

First of all check voltages going to those solenoids , secondly forward/reverse lever , those units have 5 wiring , 3 is for direction and 2 for back buzzer sound, and wiring sometimes upon build those wires are struck between dashboard assembly , and corosion between connectors

Posted 10 Jun 2025 17:34
By Archili_Gogava
joined 18 Sep'20 - 12 messages
Georgia

F/G

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.