Discussion:
Looking for parts & service manual

Our LP gas Hyster has no tag and only a stamped serial number that is apparently is so old it doesn't come up on the parts charts for most suppliers.
We are looking for a parts & service manual to put in operation again.

The Hyster forklift cranks but wont kick over and start!

Any help will be considered!
  • Posted 20 Mar 2021 00:40
  • By Tony_Canton
  • joined 20 Mar'21 - 3 messages
  • Florida, United States
Tony
Showing items 1 - 5 of 5 results.
What is serial stamped in frame? we can help you
  • Posted 25 Mar 2021 16:48
  • By Mike_Nossaman
  • joined 31 Dec'20 - 2 messages
  • Kansas, United States
We got it running! Changed spark plugs and she turned right over!

Thanks for the help!
  • Posted 24 Mar 2021 02:45
  • By Tony_Canton
  • joined 20 Mar'21 - 3 messages
  • Florida, United States
Tony
Check to make sure it's getting fuel all the way to the throttle body. Take a plug it and see if it's sparking. You can get there manuals from any o or part dealer and online.
  • Posted 24 Mar 2021 01:11
  • By Grant_Blum
  • joined 20 Mar'21 - 6 messages
  • Ohio, United States
Grant blum
D2D8605 is the only stamped numbers, but on right side near counterweight on side where hydraulic reservoir is located.
On the battery side of frame , we find no stamped numbers.
This particular number referenced above brings up a missing Letter at local Hyster dealers.

But thanks lifter01 for your contribution, we are a step closer as we continue with each inquiry!
  • Posted 21 Mar 2021 01:51
  • By Tony_Canton
  • joined 20 Mar'21 - 3 messages
  • Florida, United States
Tony
We at least need a serial number to go on Tony. It will be stamped on the chassis near the battery. As for the serial number not coming up?? It will at hyster
  • Posted 20 Mar 2021 19:51
  • By lifter01
  • joined 4 Jul'09 - 463 messages
  • West Yorkshire, United Kingdom

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Terberg YT222
Balling, Denmark
Used - Sale
Taylor TX175
Coraopolis, Pennsylvania, United States
New - Sale & Hire
Upcoming industry events …
January 28-30, 2026 - Bangkok, Thailand
March 4-5, 2026 - Detroit, Michigan, United States
March 24-26, 2026 - Stuttgart, Germany
Global Industry News
edition #1260 - 11 December 2025
In this week’s Forkliftaction News we report on DHL Supply Chain signing a deal to deploy autonomous mobile robots (AMRs) at its Mexican retail operations and look at Guidance Automation’s successful trial of an AMR with a hydrogen fuel cell... Continue reading
Global Industry News
edition #1260 - 11 December 2025
In this week’s Forkliftaction News we report on DHL Supply Chain signing a deal to deploy autonomous mobile robots (AMRs) at its Mexican retail operations and look at Guidance Automation’s successful trial of an AMR with a hydrogen fuel cell... Continue reading
Upcoming industry events …
January 28-30, 2026 - Bangkok, Thailand
March 4-5, 2026 - Detroit, Michigan, United States
March 24-26, 2026 - Stuttgart, Germany
Fact of the week
Foundling hatches are safe, anonymous drop-off points for unwanted infants, allowing parents in crisis a way to surrender a baby safely without fear of punishment, ensuring the child is rescued and cared for. The concept started in the 12th century, was abandoned in the late 19th century, then reintroduced in 1952. It has since been adopted in many countries.
Upcoming industry events …
January 28-30, 2026 - Bangkok, Thailand
March 4-5, 2026 - Detroit, Michigan, United States
March 24-26, 2026 - Stuttgart, Germany
Fact of the week
Foundling hatches are safe, anonymous drop-off points for unwanted infants, allowing parents in crisis a way to surrender a baby safely without fear of punishment, ensuring the child is rescued and cared for. The concept started in the 12th century, was abandoned in the late 19th century, then reintroduced in 1952. It has since been adopted in many countries.