Report this forum post

Please check the control valve. Underneath the main valve bank sometimes bits of dirt block the valve open....

Check pressure in the accumulator, check the engine is not hunting ie. Going into charge , cool mode within 3 seconds if so check charge valve , use a gauge and check the pressures on the data plate if you see the needle jumping consistently when on the brake test port the charge valve is suspect
  • Posted 15 Apr 2016 03:24
  • By MrKalmar
  • joined 30 Mar'15 - 8 messages
  • shropshire, United Kingdom

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Movers & Shakers
Todd J Doxsee Todd J Doxsee
National dealer development manager, Castle Equipment Company
Sales operations, Heli
Chief financial officer, Cyngn
Executive vice president and chief commercial officer, East Penn Manufacturing
Load Lifter LLL6000
Flesherton, Ontario, Canada
Used - Sale
Toyota 8FGCU25
Flesherton, Ontario, Canada
Used - Sale
Global Industry News
edition #1251 - 9 October 2025
In this week’s Forkliftaction News , hydrogen power is a theme as we report on the US marking its 10th annual National Hydrogen and Fuel Cell Day, an initiative to promote the benefits of the clean energy source... Continue reading
Movers & Shakers
Todd J Doxsee Todd J Doxsee
National dealer development manager, Castle Equipment Company
Sales operations, Heli
Chief financial officer, Cyngn
Executive vice president and chief commercial officer, East Penn Manufacturing