We charged the Batterie for the lift last night. When finished I just checked the battery Display if it is full, all was fine. Full battery was displayed and the machien was ready to work.
Today I turn the key and no function at all anymore.
No light, no Sound, nothing happens. Not even a click from a Relais.
I checked voltage of Batterie: 49.8V idle
When I connect bat to charger, charger does not charge.
I checked with a multimeter the power in connectors without a battery connected. Result 100 kOhm with key in off Position and 200 Ohm with key in ON Position.
Any help is welcome.
Right now I wonder if the battery with load Drops voltage so that not even the electronics works. Is that possible?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.