Report this forum post

The other day I had an error code E107 and it was the traction fuse, replaced and good to go. Today same machine and now an error code E203, have lift but no travel and the fuse is good. Any suggestions on this?
  • Posted 28 Aug 2010 15:13
  • By forkyoo
  • joined 28 Aug'10 - 3 messages
  • Alberta, Canada

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.
Hangcha FLDCXT160
Braeside, Melbourne, Victoria, Australia
Hire
Taylor TT300
Morgantown, Pennsylvania, United States
Used - Sale & Hire
Global Industry News
edition #1246 - 4 September 2025
Next Thursday is R U OK? Day in Australia , an important opportunity to bring conversations about mental health out into the open and a reminder to check in on those around us, including our colleagues... Continue reading
Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.
Global Industry News
edition #1246 - 4 September 2025
Next Thursday is R U OK? Day in Australia , an important opportunity to bring conversations about mental health out into the open and a reminder to check in on those around us, including our colleagues... Continue reading
Movers & Shakers
Dominiek Valcke Dominiek Valcke
CEO, TVH
Sales and operations director, Logitrans A/S
Director sales for Australia and New Zealand, Swisslog
General Manager, Forkpro Australia