Does anyone have a sequence of operation list for the drive operation of this unit? My main contactor kicks on and what I believe to be the steer motor is kicking on. The seat switch only shows.7v going to it but I can tell if this traces back to the controller in the dash or not.
The accel pedal gets a 10v feed but when checking resistance, the reading goes from 4.07 to open. Nothing in between.
** I believe my issue is the module in the dash but I need a wiring diagram showing the path of the seat switch feed.
Hopefully y'all can help me out.
I work for an old TCM dealer but we do not have this manual.
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.