Hello everyone, I am an intern at a company and I made a big mistake. I needed to swap the pins on a Zapi smart console handset, but when performing this task, I should have swapped the pins one by one to keep track of the wire colors. However, I removed all the pins from the connector at once, so now I'm not sure about the correct order. I've checked some manuals for the handset and controller equipment, and I saw that there are 6 pins on each end of the cable. My question is, do these pins correspond to each other on both ends? Can anyone help me?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.