1. Home
  2. Forums
  3. Report post

Report this forum post

I did remove the fuses tested them. I have it blocked up getting voltage to both motors. Check A1 and D1 on right motor and A2 and D2 on left and get the same voltage. Not sure what the A2 and D2 are on the right motor.
  • Posted 29 Jun 2021 05:51
  • By jordan_a
  • joined 9 May'18 - 22 messages
  • Missouri, United States

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Fact of the week
The first practical visible-spectrum LEDs were red, not white. The red colour was the easiest to produce using the semiconductor materials available at the time (the 1960s). The alloy gallium arsenide phosphide (GaAsP) used emitted red light.
Forklift Diaries
Read more Forklift Diaries blog articles
Movers & Shakers
Dominiek Valcke Dominiek Valcke
Dominiek Valcke
CEO, TVH
Chad Davis
Sales and operations director, Logitrans A/S
Steve Dimitrovski
Director sales for Australia and New Zealand, Swisslog
Michelle Mitchell
General Manager, Forkpro Australia