SC5200 serial 9A227170. AC drive and hydraulics/steering. Fuses and relays ok. Unit goes through start up and line contactor closes. Travel ok. No steering or hydraulics. Both use the same motor and pump. Motor not coming on. inputs and outputs on analyzer check ok. New series to me. If you try to lift or move the steering wheel, the lift motor rotates way slower than normal and not enough to assist in steering or lift. Most help from calls tell me to replace the motor. Others say access 2 or pump. This is an expensive gamble. Anyone ever had this same issue with a positive outcome?
This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.