Hi we have this jungheinrich reach truck which had stopped working after showing battery at 0%. We calibrate the bdi settings then works again. Recently went and changed the lisa display and 2 days later battery at 0% again. However the battery is actually 49v and under load drops to around 47 to 48v.
Can someone advise what they think could be causing this issue? Or which controller holds the bdi information.
Regards
Showing items 1 - 3 of 3 results.
Hi.
Do you have a serial nr.? YOM?
Regards, Max
Hi. We don't have another battery to v try. Settings are ok. Lisa display was changed. Battery seems to hold ok under load. I do still suspect battery now. Have asked to get battery people to come in and check battery.
Regards
Hi , do you have the battery parameters 1 - 11 set correct?
Sure battery oke? Do you have try it with a different battery they are used in other truck? Lisa holds the BDI info
Regards
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.