The contactors should be checked
If they are normal check carbon in engines,
If OK, check 111RZR modules
Pinalitan kona ng steering pot at steering sensor Sir ganon pa din. Ung right side lang ung gomagana pero mahina at nag jejerking, naka straight ung steering wheel
Please check the steering sensor is working if ok check the power module of the motor that is not working then if ok check the contactor contact point.
Regards Rolly
Lifting is okay Sir.
Steering also function but Hyd. MOTOR to Much sound Coming.
Check handbrake switch.
Voltage across battery when under load
Linde's tend to self check all their systems before moving, so if there is a fault with steering or hydraulics, they will not move.
fully charge is not really a valid statement
many problems are battery related what we need is the voltage loaded meaning if your meter is connected across the battery with lift or drive what does the voltage drop to
Baka pwidi mo akong matulongan Sir anong problema ng linde forklift.
Salamat.
Sir Mikel, i have same problem of lindi E16 tri wheel,
The problem is slowly moving the right side drive wheel ang the right side is no moving while i hang up the both drive wheel. I have no manual for reference guide, before that the problem i calibrate the steering potentiometer manually using digital multi Meter at that before the function is Normally. Okay, but today again same problem coming. What should I do Sir?
Thank you very Much
The battery on forklift is fully charged. The forklift loses movement suddenly. I press on the forklift's pedales several times The forklift don't move at all. I turn off supply, switch it on again. press about 5-6 times and forklift start moving. The seat switch is absent. Its contacts are connected directly.
start whit good look to baterie