Parameters locked out. You need CAN key to unlock them
I have the same issue with our 8210 Raymond. I can get to parameter 1, but the horn button does not cause the parameter to flash so I can change it. The horn also works fine in normal mode.
Sorry guys for some serious thread necromancy, but this is the closest I've come to finding how to change the parameters on this same walkie rider. I can get into parameters, but pressing the horn doesn't select the option/make it start blinking. Any ideas?
I was wondering if you could help me to reset my software in the charger on an 8210, i was told that sometimes you can loose the software and it will think it is charging a lithium battery or something and that it needs to be reset to lead acid
Any knowledge of this
Thanks
Raymond 8410 wiring diagram, looking for a schematic for this truck. Any help would be great.
Hey, maybe someone can help me. Got a 8210 that I can't enter any thing with key pad, programming key doesn't work. Any ideas?
Hi RayTech, my company just bought the Raymond 8210 with keypad option,but is going too slow, so I look to the owner manual to find out the procedure to change the parameter to get a full speed, so I followed the procedure, but when I enter my key code I wait about 10 seconds I got I fault code C 33. Any ideas about the problem please help me the trailer was taking only 30-40 minutes from me, now it take about 2 hours to get done please any help will be Appreciated
Hello kind sir,
Good Morning RayTech,
If your having any issues do not hesitate to call me , I see you are in Ontario , and I can provide you any Service, Training ,Or additional Product needs, the 8410 is a great machine.
Current promotions on 8210 out of Mississauga.
Friends ,and Referrals welcome
You need the dealer plug that fits into the com port. it's a red box a few inches in diameter. It lets you change the parameters beyond the first 10.
I do have the key for the unit. I just ended up buying a new keypad for it. Thank you. Can you still tell me the process of bypassing that keypad for future reference.
yes, it can be disabled. But it`s locked out, until you connect a `CAN key
You can revert back to key switch only
Hey ray tech, this is the only tread I found about the 8410. The one I'm working on has the optional key pad. I was wondering if I could just disable that? Thank you
This is exactly the information I was looking for, thanks raytech.
You can program the trucks, as long as they are not locked out with a laptop. hold horn button on while turning on key, release only when "P" shows. This is parameters. H= Hours meters E= errors and D=diagnostic with "Pn" for part #s
At "P", turn throttle to Par 01. this is Max speed walking (without rabbit) or in coast. 0-42% IF ENABLED, hit horn button, the parameter showing will flash. If flashing, you can change it by rotating the throttle
Other parameters are 02, Maximum speed, with rabbit.. 0-100% Set it to what you want. recommend 80%
next is 03 Accelerate rate. 1-5 scale. 5 is gentle ! will toss the machine into the wall each time like a jack rabbit. Set it to 3
Don't mess with P4,P5,
P6 is max speed without rabbit. 0-66%
P7 is Accelerate rate for walking speed. 1-5 with 5 gentlest
Do not mess with other options!
Again, hit horn button to enable change, rotate throttle to raise or lower settings, hit horn to accept. And don't show the drivers this!