BDI Settings - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
BDI Settings

Yale ERC030VAN36TE97

Need to know what is normal BDI settings for 36 volt lift. Need to get BDI set for battery that is in lift now. BDI is not wanting to reset after charging battery

Posted 5 Jan 2022 12:10
By rc_w
joined 6 Apr'11 - 6 messages
North Carolina, United States

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Battery is good. I need to know what the settings are when setting up the BDI. In the manual where it shows setting the BDI it shows 152A. The factory default is 2A

Posted 6 Jan 2022 09:51
By rc_w
joined 6 Apr'11 - 6 messages
North Carolina, United States

Post a Reply Report this post

What might be the problem is that after charge and battery sits over night cells drop below 2.1 volts per cell so BDI will not reset. Try to put battery back on charge for approx half hour then plug into truck and see if BDI resets. If resets battery is weak and will probably need to be replaced soon hope this helps.

Posted 5 Jan 2022 12:45
By Scott_
joined 16 May'21 - 318 messages
Pennsylvania, United States

Scott

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.