I have a machine that shows an 02 code for just a second and the clears up ,but it's slow raising up with operator onboard and only runs in slow mode. Any suggestions?
Showing items 1 - 4 of 4 results.
Park the scissor lift in a well ventilated area near an electrical outlet.
Press the emergency shut-off switch to prevent another operator from unknowingly driving away while the lift is plugged in....
Locate the battery charger on the base of the lift on the right side.
How do you charge a GS 1930 scissor lift?
hello bruce,
the 02 code is a communication error between the platform and the ecm.
usually caused by a bad control cable or a problem in the platform control.
I would open up that platform control box and check the joystick assy and hardware and wiring real good in there. It might have some parts on the joystick that may have vibrated loose which might be causing the error and the slow operation.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.