No hydraulics - Technical Troubleshooting discussion in Forkliftaction's forums

Hyster S60XM:
No hydraulics

No lift-tilt-side shift and stiff steering. Any ideas?
Haven't checked pressures, fluid level is ok

Posted 6 Oct 2014 01:03
Discussion started by shaun_p
Ontario, Canada

Post a Reply Report this post

Showing items 1 - 4 of 4 results.

Sort messages by:

Thanks swoop.. I will post back with my findings

Posted 6 Oct 2014 09:31
Reply by shaun_p
Ontario, Canada

Post a Reply Report this post

the secondary relief valve (located on the end housing of the control valve) may be damaged.
pressure test port is located on the main lift valve section, hook a 3000psi guage to it and then operate the tilt in a stall mode and take a pressure reading. it should read about 2250psi.

if it does not then you have an issue with the flow regulator (secondary relief valve) for auxillary pressure.

this would be my first guess since it is affecting all the auxillary functions and steering.

Posted 6 Oct 2014 07:42
Reply by swoop223
North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

D187V30400A
GM engine

Posted 6 Oct 2014 02:04
Reply by shaun_p
Ontario, Canada

Post a Reply Report this post

Serial number of truck??

Posted 6 Oct 2014 01:58
Reply by kevin_t
Pennsylvania, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.