Pallet Stacker SX3000-30
hello dear,
this Pallet Stacker burned the hydraulic contactor, after we replaced the lift contactor, it does not drive anymore, no forward or reverse.
I double checked the cables, not sure if we did anything wrong?
we notice the red led on the module blinks 4 times then pause and continues with 4 blinks.
please any advice will be greatly appreciated.
Showing items 1 - 4 of 4 results.
Thank you, Marcos,
Will check the harness,
Four blinks normally means your module fried. Also, check your handle main cable harness it's probably causing a short.
thank you so much, Ron_K,
I check it and let you know how it goes.
i really appreciate,
kind regards,
You have either a accelerator pot open issue, broken wire in handle cable, or B2 wired incorrectly or defective
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.