Hello There
A have a Steinbock LE 16 serial number 28 58 63, coming wtih error code 014.
The machine has no function working.
Anyone that know this problem please reply
Showing items 1 - 20 of 21 results.
Sorry it should be "In very small writing "
Hi Powerlifter
I checked the truck myself and it is showing a code A14 also it has Stop in were small writing. Thanks again for your help. Sandy.
Okay Powerlifter that would be great if you can find something. There are no codes. Nothing is working, no traction, hydraulics or steering.
Hi Sandy
Sorry but they dont make these anymore its a bit of trial and error to as and when a engineer is selling one on one of the many websites.
These trucks are old hat now so programmers are a bit thin, i will ask one of my contacts for you thou to see if he has one.
what codes you getting ?
Hi powerlifter,
Where can I buy a LT200 programmer? Your assistance is very much appreciated.
Sandy
Hi
You need a LT200 programmer but the fault will be in the LT200 box thats the silver box on the r/h side.
Regards
Did you get any where with the fault on your Boss LE16HV, we have one with no functions, No Traction, Hydraulics or Steering. What type of programmer do we need to analyse the problem or is there any wiring diagrams for this truck.
I got error code AR 04, what that mean?
Thanks in advance
Hi,
I need electric schemas/ diagram for forklift Steinbock Boss LE18HV.
Thanks in advance,
Best regards Marija
Good afternoon,
I dont have the machine yet in the workshop.
Thanks
can u send picture for it
I have the a same problem with a same machine, and i change the electrical brushes and this problem have desapear.
Thanks
Have you had such a problem?
They told me that I need to program it and scan the faults
Good afternoon,
I had this problem.
Try to change the electric motor brushes.
In my case it worked.
Thank you
A have a Steinbock LE 16 serial number 28 58 63, coming wtih error code 014.and 039
The machine has no function working.
please How can I program it
Hello i have the code (014) error in same machine with a serial 223767.
The machine is no direction and hidraulic not work.
You have a table code error for this machine?
STEINBOCK LE16-55MP - 300Z
223767
1998
Thanks a lot
A have a Steinbock LE 16 serial number 28 58 63, coming wtih error code 014.and 039
The machine has no function working.
please How can I program it
thanks
Hi,
the Code is ERR 014, check the Controller which is blinking Red 14 Times there are 3 Controllers in the Back of the forklift. LEFT = Hydraulik / Power Steering, MIDDLE = Left Drive Motor, RIGHT = Right Drive Motor. The ERR 014 Says that the Mosfet for the Field of the Motor can not be powered on. In 95% The faults the Controllers is dead you only can set in a new one. But be careful sometimes the Motors have Metall or Something other in what makes an Connection from the Anker to the Field which kills you the Controller. So Check that.
PS. When you set up the new one you need the Programmer to program the new one. No Programmer no Way!
Mfg
Sven
Cheers powerlifter
I will Check this up.
I will let you know when the machine is running again.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.