Hi,

the Code is ERR 014, check the Controller which is blinking Red 14 Times there are 3 Controllers in the Back of the forklift. LEFT = Hydraulik / Power Steering, MIDDLE = Left Drive Motor, RIGHT = Right Drive Motor. The ERR 014 Says that the Mosfet for the Field of the Motor can not be powered on. In 95% The faults the Controllers is dead you only can set in a new one. But be careful sometimes the Motors have Metall or Something other in what makes an Connection from the Anker to the Field which kills you the Controller. So Check that.

PS. When you set up the new one you need the Programmer to program the new one. No Programmer no Way!

Mfg

Sven