how do i pull the fault codes - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
how do i pull the fault codes

Hyster E40XL

Just found this forum and it is great. Cool to see people who enjoy dealing with forklifts.
So I'm having this problem: Have an older e40 xl-27 Hyster SN:c108v.. does not have a display to show codes and when I went to hook up the ev100lx handheld tester, the plug was incorrct for the card. The plug is very similar but the slots are spaced differant. There must be a system older than the LX. How do you retrieve the codes? I was working for a cat dealer in the 80s and must have missed something UH.

Posted 27 Feb 2009 14:34
By rrlift
joined 27 Feb'09 - 22 messages
Illinois, United States

Working so I can ride.

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

does that old chariot not have a sevcon panel. why do you need to pull codes ,whats the problem mate

Posted 1 Mar 2009 19:35
By kevin_k
joined 25 Nov'05 - 502 messages
dumfriesshire, United Kingdom

Post a Reply Report this post

it should fit
the plug is the "Y" plug
the larger of the two sized plugs
the 1st large plug to the right of the terminal board
usually has less wires

they go in this order
A - B TB Y Z when you have the card situated as you can read the part number

also make sure no one replaced the Y plug on the handset with a Z plug
the keys are spaced differently and wont work for each other

other than that my handset always works

the SX series uses the same LX handset with a different plug style (PY)

Posted 28 Feb 2009 04:46
Modified 28 Feb 2009 04:47 by poster
By justinm
joined 13 Apr'06 - 604 messages
New York, United States

New York, New York its a heluva town..you know that The Bronx is up..and I'm Brooklyn down

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.