Error Code B-17 - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Error Code B-17

Nichiyu FBRW15-80

Dear all Engineer,

I have Nichiyu Forklift with type FBRW15-80 had code error B-17 "sensor TRV error". if the error code is missing, the forklift runs slowly, while if the error code is present, the forklift runs normally.
could you help me with this?

Thank you.

Susana

Posted 17 Oct 2022 20:43
By Susan_Indri
joined 10 Sep'20 - 17 messages
Indonesia

Post a Reply Report this post

Showing items 1 - 2 of 2 results.

Sort messages by:

Hi Paddyteclinde

Ok, i'll try and i will tell you the result.
Thank you for your help.

Posted 18 Oct 2022 13:54
By Susan_Indri
joined 10 Sep'20 - 17 messages
Indonesia

Post a Reply Report this post

Hi Susan
Try the following
B17 Foot brake fault.
Foot potentiometer or brake microswitch is failure.
When key switch is turned on, the input voltage (CN6-8) in the MPU board is under 0-15V. or over 3.13V
Or it is under0.78Vwith the actuator of the brake microswitch turned off.
Or it is over 2.4V with the actuator of the brake micro switch turned on.

Posted 18 Oct 2022 03:11
By Paddyteclinde
joined 3 Dec'21 - 32 messages
Ireland

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.