Discussion:
Electric error code 15

My forlklift will not move. The display show error code 15. Any help?
  • Posted 16 Feb 2008 05:31
  • By ProPack
  • joined 16 Feb'08 - 2 messages
  • Missouri, United States
Clay Gregorc
Showing items 1 - 4 of 4 results.
Battery defect
  • Posted 15 Apr 2008 06:25
  • By johngen
  • joined 15 Apr'08 - 275 messages
  • NB, Netherlands
Email harlekein@hotmaildotcom and djdotdj@kpnmaildotnl
As suggested,check the battery voltage,and check the main power fuse,as well.
  • Posted 16 Feb 2008 15:25
  • By Truck_Tech
  • joined 30 Mar'07 - 152 messages
  • United States
When I parked the truck it was reading 90%. If the battery is low, any ideas on how to get it to the charger? Thanks.
  • Posted 16 Feb 2008 06:25
  • By ProPack
  • joined 16 Feb'08 - 2 messages
  • Missouri, United States
Clay Gregorc
If the truck has GE EV-100 control, -15 is battery voltage too low.
Should have 1.95 volt per cell or higher. Or if the truck was set for let's say 48 volt and you tried a 36 volt battery, 15 would be displayed. Sounds like the battery needs charged at the very least.
  • Posted 16 Feb 2008 06:18
  • By carl_v
  • joined 12 Oct'07 - 76 messages
  • Pennsylvania, United States

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
Funerals in Spain typically occur within 24 to 48 hours of death, whereas in other European countries they wait one or more weeks. This rapid timeframe is a cultural norm grown from the past need to manage the warm climate without modern embalming.
Movers & Shakers
Rob Ott Rob Ott
Executive vice president and chief commercial officer, East Penn Manufacturing
President, Logistics UK
Director of dealer development East Coast, Big Joe Forklifts
Vice president, customer, TVH Americas