Display error 208 - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Display error 208

Still R60-30

Display shows code 208 after about 3 seconds of acceleration and traction stops! By realising the accel pedal and trying again, it makes the same problem!

All hydraulic systems are working!

Posted 7 Oct 2015 02:29
By Kirlift
joined 7 Oct'15 - 5 messages
Attica, Greece

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

Hi Nino,
The error codes No 206 and 208 => The speed sensor of the traction/drive motor is faulty.
=> Please check the wirings from the speed sensor to the power module. it normally has 4 wires : 2 for power supply & 2 for signal feedback.
=> Remove the speed sensor then clean it as well as check the gap between the sensor to the motor shaft.
=> Replace the new sensor.
Cheers

Posted 13 Sep 2021 00:56
Modified 13 Sep 2021 01:02 by poster
By Nunanemo
joined 24 Mar'19 - 24 messages
Viet Nam

Cheers
Nuna - Ho Chi Minh City
Email: dairongservice1973@gmail.com
Website: xenangdairong.com

Post a Reply Report this post

I have a Still R60-45 with same error code.
Display shown 206 and 208 error code.
Anyone can help me?
Thanks!

Posted 12 Sep 2021 23:33
By nino_m
joined 9 Feb'17 - 68 messages
Tehran, Iran, Islamic Republic Of

Email: hm3@engineer.com

Post a Reply Report this post

any update for this problem?Same problem here. Hoping for some master will give an advice.

Posted 3 May 2017 20:52
By justin_d
joined 27 Feb'16 - 28 messages
RIYADH, SAUDI ARABIA, Saudi Arabia

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.