Evaluating medical fitness

Rob Vetter -
Safety First
- 18 Dec 2008 ( #391 )
2 min read
A trainee's medical fitness is not something that can be competently evaluated by a trainer<br />PHOTO: SHUTTERSTOCK
A trainee's medical fitness is not something that can be competently evaluated by a trainer
PHOTO: SHUTTERSTOCK
Rob Vetter is technical director and managing partner with the Ives Training Group, in Blaine, WA, USA, a leader in North American mobile equipment training systems since 1981.
In the part of the world in which I work, North America, there are several regulatory jurisdictions whose requirements include minimum medical fitness for forklift operators.

Typically, these focus on:
* Minimum eyesight requirements with a provision that states theoperator wear corrective lenses (glasses or contact lenses) as required/applicable while operating.
* Hearing. As in the case of eyesight, if the operator requires a hearing aid to hear warning signals, etc, it/they must be worn while operating.
* The ability to distinguish colour, if it is required on the job.
* The ability to move all body parts freely with the strength, agility and endurance to meet the demands of the job.

I will not go into detail on the politics that requirements such as these can involve, but I will discuss how they affect us as trainers. In a nutshell, a trainee's medical fitness is not something that can be competently evaluated by a trainer. Assessing the physical, non-operational capabilities of trainees is a highly specialised task requiring knowledge and skills associated more with medical training than anything the average forklift trainer could count among his or her qualifications.

So, where does that leave us trainers when we have a trainee with an obvious physical impediment? Well, in my opinion, it leaves us exactly where we have always been: in charge of assessing a trainee's operational competencies as per our qualifications. If an operator trainee comes to me with an eye-patch and a limp, it is of no concern to me unless it becomes an impediment that affects their ability to operate the equipment safely. In other words, if a trainee comes to me with an arthritic neck, I am going to proceed with him or her just like I would with any other trainee. In fact, I have to. I cannot arbitrarily reject anyone for training and/or evaluation because of a perceived or observed disability. It is discriminatory and illegal. However, it is highly unlikely that a trainee with an arthritic neck will successfully complete the program and become qualified - not because of their arthritis, but because they would be unable to turn their head to check rear clearance before reversing, which is something I absolutely must see consistently before qualifying a trainee as an operator.

To summarise, a trainee's medical fitness is none of my business and beyond my capabilities to assess. When a trainee shows up to my training program I assume that the employer has done their due diligence and ensured they are physically fit with respect to the job. From that point on, any conclusions I draw on the trainee are based solely on performance. If the person with the eye patch and the limp can show me what I need to see, then they become qualified. It's as simple as that - no degree required.
Also Read:
New safety book to cut accidents
1 minute read
New safety book to cut accidents Safety First - 15 Jan 2009 (#393) The Fork Lift Truck Association (FLTA) has released a new employee safety booklet to help cut the number of accidents involving forklifts. 'Employee Safety: Working with Fork Lift Trucks' is...
Boom lift to raise autism awareness
1 minute read
Boom lift to raise autism awareness Safety First - 18 Dec 2008 (#391) Two US companies are working together to raise over USD7,000 a year to raise awareness about autism using a bright yellow 86-foot boom lift with red and blue jigsaw-piece graphics...
For more unique stories and expert insights: read our industry blogs
Blog articles provide perspectives and opinions and therefore may contain inaccurate or incomplete information. Forkliftaction Media accepts no responsibility for errors or omissions. If you feel that significant facts are overlooked, or have a different viewpoint on a topic addressed, we invite you to open a conversation in our Discussion Forums.

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET

Inside The News
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Upcoming industry events …
May 09-11, 2025 - Bangalore, India
October 21-23, 2025 - Panama City, Panama
July 15-17, 2025 - Hong Kong, Hong Kong
Inside The News
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading

Are you recruiting? Find your ideal candidate among a diverse range of materials handling professionals:

Forkliftaction's JOB MARKET

Inside The News
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Maersk opens French warehouse Hauts-de-France, France

PREMIUM business

Cascade Corporation (World HQ)
Leading manufacturers of attachments, forks and related technologies for forklifts and AGVs.
Upcoming in the editorial calendar
Upcoming industry events …
May 09-11, 2025 - Bangalore, India
October 21-23, 2025 - Panama City, Panama
July 15-17, 2025 - Hong Kong, Hong Kong