Discussion:
What do you want?Price or Quality?

I don't know why so many derogatory term on Chinese forklift. As a Chinese manufacturer, I'd like to konw what do you want? Price or Quality? I have given too many quotations to foreign dealer, they all said "your price is too high, it 's not competeive in my area." Please note, when we talk about price, they means nothing about the quality and just press down the price. Ok, everybody here knows no good quality at low price. Chinese forklifts have been much cheaper than any other brand. Why do you still want to low down the price? You want good quality but give no profit to Chinese producer and complain much here...Chinese people are not superman, we can't make out forklift likes Linde with the price below the raw material.
  • Posted 30 Oct 2007 17:50
  • By fred_w
  • joined 30 Oct'07 - 5 messages
  • Shanghai, China
Showing items 1 - 9 of 9 results.
John,
Good Point that makes sense. Geeesh it was a mess.......... They might want to try advertising on the super bowl this week, USA Today reported to be alot of empty slots unfilled. lol
  • Posted 30 Jan 2009 08:10
  • By Raymond
  • joined 29 Jan'09 - 16 messages
  • Kentucky, United States
Raymond,

Initially,some of the Japanese companies (like Mitusbishi) tried to market there products with their people and met with little success. After they hired American staff supported by Japanese staff they start to become successful.
  • Posted 29 Jan 2009 19:42
  • By johnr_j
  • joined 3 Jun'06 - 1,452 messages
  • Georgia, United States
"Have An Exceptional Day!"
At ProMat 2009 I looked at some of the trucks from China and found them to be better quality or thicker paint,then ProMat 2007. I did see "panic" and "desperation" plus crude sales tactics at one both.Was asked many times if I wanted to become a dealer.I felt sorry for the young gal and it was kinda creepy too. Felt like I was shopping for a used car back in the 70's. Need to ride with my Yale sales rep and mellow out.
  • Posted 29 Jan 2009 13:33
  • By Raymond
  • joined 29 Jan'09 - 16 messages
  • Kentucky, United States
batman

The Japanese brands entered the US market with both good pricing and higher quality than the US built units. Their inroads into theUS market were most significant in the late 70's to mid 80's when most US companies were struggling to provide a quality product or in some cases provide equipment to customers/dealers.

Many dealers started dual lining and first put units in their rental fleet and found that there maintance/repair cost were signifcantly lower than there main lines. For example, dealer found that the tires (Japanese made) would last up to 3 time longer than US supplied (primarily due to the higher carbon black used).

As all good things msut come to a pass - it was discovered their pricing in the US market was too good and all were hit with anti dumping suits - hence they started assembling units in the US and price went up. But they had already established a market acceptance of providing high quality products with good product back up - parts, service and distribution (dealers/national account, etc.)
  • Posted 15 Mar 2008 23:21
  • By johnr_j
  • joined 3 Jun'06 - 1,452 messages
  • Georgia, United States
"Have An Exceptional Day!"
Dear Fred
What Chinese brand do you represent
Now a day we plan to deal in Chinese forklifts and choosing a partner
write [email address removed]
  • Posted 13 Mar 2008 23:19
  • By sotrans_a
  • joined 11 Mar'08 - 10 messages
  • SPb, Russian Federation
fred w, If Chinese manufacturers want to break into the US market your price MUST be way below that of the already established OEM's. There is a place in the US market for cheap forklifts. Low end users who don't use the forklifts much, beer distributors, etc. This was the approach that the Japanese OEM's took when they first hit the US market. You could buy a Japanese built forklift and save about $5,000 over the Hyster's, Yale's and Clark's. Everyone knew the truck would in no way outlast the American made forklift but for many users it was a godsend. Also, the dealers were making about 3 or 4 thousand profit on every truck. This fact alone had dealers lining up to take on a Japanese line. China trucks will never get off the ground without price, fact.

Also, how can a Chinese OEM expect to sell a product made of mostly Chinese parts for the same price as a "US" truck? Plus a huge turnoff is your fit and finish. Simply put your fit and finish is horrible. Cheap paintjobs, massive amounts of bondo on the truck, cheap vinyl (stickers) and cheap seats. Toyota and Cat's fit and finish is exceptional, and you want to sell your truck for the same price or just a little less? No way.

There is a place for a Chinese forklift in America and, I think, a Chinese car. But it better be cheaper because that is the perception that American's have of Chinese products. Until you change that perception, like improving fit and finish to start, you need the price factor.
  • Posted 1 Dec 2007 09:06
  • By batman
  • joined 29 Nov'07 - 119 messages
  • Pennsylvania, United States
Thanks every one. At least we could know each other's idea.
Maybe we could have time to talk about the cost of one forklift to see whether there is a company could produce both "high quality" and "low price". I think it's impossible. If a manufacturer could bulit forklifts like that , no other brand forklifts will exist in the world. As all customer will buy the goods with "quality and price"

Ok,let's just post thought~
  • Posted 8 Nov 2007 14:58
  • By fred_w
  • joined 30 Oct'07 - 5 messages
  • Shanghai, China
Someone could indicate some Chinese manufacturers of tires, filters or Battery?
  • Posted 6 Nov 2007 23:02
  • By carlos_dp
  • joined 24 Oct'07 - 10 messages
  • SP, Brazil
I am agreed with you etharp
  • Posted 31 Oct 2007 15:02
  • By Joei
  • joined 20 May'06 - 23 messages
  • Kepri, Indonesia

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

PREMIUM business

F. Uchiyama
Global exporter of used forklift and construction machinery, servicing over 80 countries.
Latest job alerts …
Davenport, IA, United States
Philadelphia, United States
Prospect CT, United States
Dayton OH/Cincinnati OH, United States
Global Industry News
edition #1251 - 9 October 2025
In this week’s Forkliftaction News , hydrogen power is a theme as we report on the US marking its 10th annual National Hydrogen and Fuel Cell Day, an initiative to promote the benefits of the clean energy source... Continue reading
Taylor T650L
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
Crown RR5225-30TT321
Braeside, Melbourne, Victoria, Australia
Hire
Upcoming industry events …
October 14-16, 2025 - Antwerp, Austria
October 15-17, 2025 - Bangkok, Thailand
November 17-19, 2026 - Luanda, Angola
Fact of the week
Brothers Adolf ("Adi") and Rudolf ("Rudi") Dassler split their shoe company after WWII due to a bitter feud, and established the rival companies of Adidas and Puma. Their personal animosity and business rivalry divided their German hometown Herzogenaurach. The town became known as "the town of bent necks" due to the intense loyalty to each brand.

PREMIUM business

F. Uchiyama
Global exporter of used forklift and construction machinery, servicing over 80 countries.
Global Industry News
edition #1251 - 9 October 2025
In this week’s Forkliftaction News , hydrogen power is a theme as we report on the US marking its 10th annual National Hydrogen and Fuel Cell Day, an initiative to promote the benefits of the clean energy source... Continue reading
Movers & Shakers
Todd J Doxsee Todd J Doxsee
National dealer development manager, Castle Equipment Company
Sales operations, Heli
Chief financial officer, Cyngn
Executive vice president and chief commercial officer, East Penn Manufacturing