Hello
I have problems with this machine. Roughly starts and sometimes does not want to go forward or backward. Probably hydraulic failure, but I wanted to Linde connected via a tester, but I can not find anywhere to plug tester. Is this at all? Its leader in stone type 390 360 50 85, Type 02-BR351T.
Best regards, Laci
Showing items 1 - 14 of 14 results.
Hi Micky,
I have problem with this part too and for me it will be very very helpful if you can send me the drawing, please! I can find where to buy a new one or used one, so this is my only chance to find the drawing and try to repair it myself. Thanks a lot in advance!
Hi Laci, how are you.
Check your Email for Linde drawings.Let me know if they are correct.
Micky
Hello
The machine's fault is that, when heated, tugging hard to start well in advance and backward. The oil pressure is fluctuating. Separation of the oil pump is in bold and the control block. To do this, it would be some kind of exploded drawings and printing settings data.
Best regards, Laci
Thanks Michel
Best regards, Laci
Thanks Michel
Best regards, Laci
zo far i no type 351 dond hef laptop dianosticks
best regards michel
In 350 series this connector is located beside valve block.
Check your mail.
Regards
Hello
The question is still relevant. I can not find where is the diagnostic connector!
best regards, Laci
not be giving my mail does not allow me, all operate at pressures of oil but there are mechanical and other electronic
This machine are set to the pressure on the valves, and why I think that pressure error. But if anyone knows that this is and where the service is connected to the tester?
Hello Juan.
Please your email adress. My is in my profile
Hello there are two versions of the year 2000 with control unit if it is that, apparently have the problem in the throttle potentiometer.
If it is an older model the failure must be in the hydraulic throttle body.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.