I need a distributor GM 4.3 HEI, DISCUSSION FORUM

I need a distributor GM 4.3 HEI

brokendirtbike
Washington, United States

Posted 5 Jun 2012 02:13 AM

I am looking for a HEI distributor for a Hyster H90XLS serial# F005D04479M with a GM 4.3 without vacuum advance. Hyster no longer sells this or parts. I am looking for a new one or rebuild kits. Thanks for the help.

[email address removed]

Hard working with little time for hard playing
josh dot olivia gmail

Reply Report

Post reply

Showing items 1 - 9 of 9 results.

Sort messages by:

kevin_t
Pennsylvania, United States

Posted 5 Jun 2012 06:56 AM

Could try a local auto parts like NAPA or along those [url removed] the distributor with you to match up,also see if there is any numbers on it that may help.

Reply Report

bbforks
Pennsylvania, United States

Posted 5 Jun 2012 07:10 AM

I agree with kevin t- I'd take the distributor to your local NAPA- I've had good luck with their parts-ask to see their illustrated buyers guide on ignition parts & replace the internals- not sure if entire distributor would work

bbforks (at) Hotmail (dot) com
Customers love technology- until they have to pay to fix it!

Reply Report

kevin_t
Pennsylvania, United States

Posted 5 Jun 2012 07:15 AM

one other word of thought,i believe that the GM engines in forklifts are the GM Marine engines and are a little diffrent than the automotive engines,ran into this on a GM 4.3 in a CLARK forklift starter from NAPA,just something to remember.

Reply Report

brokendirtbike
Washington, United States

Posted 6 Jun 2012 04:21 AM

I talked to them over the phone. But I will bring it in and try that. It's hard to get good help at my Parts store.

Reply Report

bbforks
Pennsylvania, United States

Posted 6 Jun 2012 06:51 AM

If you get no help send me a picture of the internals of your distributor & I'll see what I can do

bbforks (at) Hotmail (dot) com
Customers love technology- until they have to pay to fix it!

Reply Report

dale_w
Missouri, United States

Posted 7 Jun 2012 03:11 AM

I have gotten them at Carquest and they have them on the shelf for these units.

Reply Report

swoop223
North Carolina, United States

Posted 7 Jun 2012 02:38 PM

yep just about any autoparts store might have one if you take the old one in to match it up

You've been swooped!
swoop223@gmail.com

Reply Report

Jplayer
North Carolina, United States

Posted 7 Jun 2012 09:12 PM

hyster lists it still in their parts diagrams
375622
along with all the internal parts
i suppose what your suggesting is the part is discontinued
strangly enough there are reference notes that indicate this distributor can still be obtained as part of an engine assembly, of course who wants to buy a complete engine for just one part of it.
doh!

John Player Jr
_________________
LiftOne, LLC
Charlotte, NC
Email: jplayer@liftone.net

Reply Report

brokendirtbike
Washington, United States

Posted 19 Jun 2012 11:24 AM

I think I found the distributor at Napa # NRD481685

Reply Report

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.