hi to every one & hope you can help.i have a still r70 forklift with merc engine & electric drive motor. problem started with forklift would run fine then stop going forwards & back, if you stoped the engine & restarted it would work ok but in the last week it has got worse & worse & has stoped moving all together. engine will start fine & lift ,shift & tilt. this forklift dos live out side in all the weather. numbers on plate are ssv2.5 9612 dfg 2.0/70020070
any help would much be appreciable
Showing items 1 - 13 of 13 results.
hello my trolley still R70-30 has the same problem it starts but does not want to move can you help me thank you
[email address removed]
hello I have a still r70-30 diesel forklift it starts but does not want to move forward I have checked a lot of things but I cannot find the fault please help me
dsl for english i am from france
my email:[email address removed]
hello I have a still r70-30 diesel forklift it starts but does not want to move forward I have checked a lot of things but I cannot find the fault please help me
dsl for english i am from france
my email:[email address removed]
hello same problem my truck still r70-30 starts but does not want to roll have you found the breakdown if yes what was this breakdown thank you
Hi everyone i have a Still Forklift r70-20i and it wont move i have checked everything but it still not moving.The engine starts fine ,hydraulic system work but it wont move back or forward.
there's a burnt out electronic card in the electronic main board section
ok alernator fixed & forklift is moving , thanks for the help guys ,all the best
Hello!
Can anyone send electrical plans for STILL R70-16 fb.numer. 517074005861 l.2004 namely the electronics on the left side in the direction of travel of the steering wheel!
Thank you all!
my e-mail bozic.bostjan A gmail.com
thankyou octav & nigel w for the replys i will check it today
MAKE SURE ALTERNATOR BELT IS VERY TIGHT AS IT USES ALTERNATOR POWER TO CONTROL ELECTRICS
Check the relays and the alternator.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.