Blinkers on my 5000# truck stopped working. I checked all the bulbs, and fuses.
Logical guess for me was the switch so I changed PN 25541-fk000, SW-turn signal, on the steering column.
I pulled the relay in the left foot well and switched it with the backup alarm relay and it worked there.
Im stumped. We dont use them in our small shop but it bugs me. If its on the truck it should be working.
Gary
Showing items 1 - 5 of 5 results.
MEngr, Ordered with standard light set up. I did check and its not on the options section of the manufactures line card.
gary;
Was the truck purchase with the OPTIONAL flasher package?
Under the cover, next to the horn is a blue relay with only two wires going to it. Voltage meter on these two wires shows 2.12 volts with the blinkers on or off.
the wires plug into terminal 1 and 2 on the relay. 73 Ohms resistance is measured across those terminals.
Nothing plugs into the N.O. switched terminals 3 and 4.
I did wonder about the relay that is screwed to the cover on the mast side, Ill check that. Thank you.
gary;
Under console cover look for flasher relay.
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.