1. Home
2. Forums
3. Technical Troubleshooting
4. Clark
5. UNK

Clark UNK:
clark TMX20 zapi fault codes

Looking for some help with fault code 079.
a/c lift, double E rated. no travel.
TMX25-0000-9597

thank you in advance for your help.

• Posted 1 Jul 2011 05:03
• Discussion started by buzzurd40
• Texas, United States

Post a ReplyReport this post

thanks makes me think diagnosis of battery issue is right

• Posted 13 Aug 2014 23:14
• Reply by grant89
• Minnesota, United States

Post a Reply Report this post

SHOP- REPLACED TRANS SELECT SWITCH
EVALUATED TRUCK SENT BATTERY FOR EVAL
AND BATTERY CABLES WERE REPLACED
REINSTALLED BATTERY PERFORMED
OPERATIONAL CHECK AND RETURNED UNIT BACK.

• Posted 13 Aug 2014 23:05
• Reply by buzzurd40
• Texas, United States

Post a Reply Report this post

Seat switch is wired out think I found the problem in the battery the one we used for testing purposes was junk plugged in a good battery and it seems to operate fine. This truck has been a pain due to some "Genius" cutting the main wiring harness to the controllers had to rewire and that was the last piece of the puzzle

Some people should not be allowed to have tools

• Posted 13 Aug 2014 22:42
• Reply by grant89
• Minnesota, United States

Post a Reply Report this post

Check your seat switch.....

• Posted 13 Aug 2014 07:02
• Reply by kevin_t
• Pennsylvania, United States

Post a Reply Report this post

Did you ever find out what was causing this code have the same issue in a tmx 20 if you fully depress the accelerator it drops out and code -079 kicks in

• Posted 13 Aug 2014 06:48
• Reply by grant89
• Minnesota, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.