1. Home
  2. Forums
  3. Maintenance & Troubleshooting
  4. Trouble codes

Discussion:
Trouble codes

Have codes 524225-0 and 524223-0 changed pressure sensors. Even swapped solenoids but still goes disabled when pressing peddle all the way down
  • Posted 19 Jun 2020 08:37
  • Modified 22 Jun 2020 04:20 by poster
  • By Gonzo7
  • joined 19 Jun'20 - 6 messages
  • Illinois, United States
Gonzo
Post a ReplyReport this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

TOC Europe wraps up Rotterdam, Netherlands
Upcoming industry events …
Electric & Hybrid Vehicle Technology Expo 2025
October 6-9, 2025 - Detroit, MI, United States
The Battery Show North America
October 6-9, 2025 - Detroit, MI, United States
ASCL Awards 2025
November 14, 2025 - Melbourne, Australia
More Events
From the forum discussions …
"Congrats and thanks to a Gold Award Tech, DyslexicNerd_01 who writes: "There is no fuse for the lift motor on this (Crown MT20) model of lift. Most likely you burned out the lift/hydraulic motor...""
DyslexicNerd_01, United States
Read & Post in our Forums
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".
From the forum discussions …
"Congrats to Afshin who was the second person to use the new photo system on the Forums. Click on the photos to see them enlarged. Afshin writes: "I have a error code 06-03 in Toyota 8FG30...""
Afshin, Iran, Islamic Republic Of
Read & Post in our Forums

Showcased in the Virtual Expo

Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Ask us about editorial contribution
Forklift Diaries
From the forum discussions …
"Congrats to the first person to use the new photos in the forums - Darek_S says: "I attached a couple photos of the valves I visually inspected (Toyota 7FBEU20). I followed the pressure line to the flow regulator valve...""
darek_s, United States
Read & Post in our Forums
Fact of the week
The use of "hello" as a telephone greeting is attributed to Thomas Edison. He is said to have suggested it as a simpler alternative to other greetings, such as "Do I get you?" or "Are you there?".