Good day,
I have troubles with my Linde E20-02 336.
My machine displays error code 92.
Lift works, just no traction.
All switches are functional (parkbrake, cabin switch, seatswitch)
Potentiometer is functional and calibrated
According to TruckExpert the code means:
The fed back voltage of power unit 1A1 does not match the preset PWM clock pulse ratio.
Anybody a idea?
Or should I just bin the LDC?
Kind regards
John Kivits
Showing items 1 - 4 of 4 results.
Hello there. I have this problem too. How do we solve it, did you solve it?
connector X13 pin 34 was loose same machine same problem
i've only in deutsch language:
Fehler im Pfad X13:30 - X11:21
oder
Fehler im Pfad X13:10 - X11:22
oder
Fehler im Pfad X13:31 - X11:13
oder
Fehler im Pfad X13:24 - X11:23
oder
Fehler im Pfad X13:43 - X11:4
oder Defekt im Leistungsteil
hoi , controleer rijmotoren op lekspanning , kan je zien of er een fed open blijft staan in diagnose?
menu:
Venster 61 Ut: 1,3V Venster 62 Ut: 1,3V
Ub: 1,3V Ub:1,3V
Moet 0! volt zijn
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.