1. Home
  2. Forums
  3. Design & Engineering

Discussion:
Crown Wave 50

I had a few issue with the batteries in my Crown Wave50. I was finally able to get them to charge but now I am getting a 29 service code. Does anyone have any experience with this problem.
  • Posted 17 Sep 2019 07:14
  • Discussion started by agmoadeeb
  • California, United States
Andrew G
Post a ReplyReport this post
Showing items 1 - 2 of 2 results.
Thanks. I replaced the one on the charging plate at the bottom front. Just looked at the one on the top. I cant tell if it is on or off. I will replace it. Thanks for the tip. I will let you know what happens. God bless..
  • Posted 21 Sep 2019 00:53
  • Reply by agmoadeeb
  • California, United States
Andrew G
Post a Reply Report this post
Your contactor is not closing. Check the ED switch out front on panel. I have gad them break.
  • Posted 20 Sep 2019 20:41
  • Reply by Ward
  • Georgia, United States
C.Ward
Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Mafi MT25
Mafi MT25 2008
Balling, Denmark
Used - Sale
Taylor TXB180S
Taylor TXB180S 2010
Coraopolis, Pennsylvania, United States
Used - Sale & Hire
|
Upcoming industry events …
Australian Forklift Championship
July 22-24, 2025 - Sydney, Australia
The Health and Safety Event Asia
November 11-13, 2025 - Singapore, Singapore
Retail Supply Chain & Logistics Expo London
November 12-13, 2025 - London, United Kingdom
More Events
From the forum discussions …
"Toyota 8FGCU30:Backfiring - Thanks Scott_ from Pennsylvania. Normally most backfire problems come from some problem with the ignition system l would check..."
Scott_, United States
Read & Post in our Forums
Upcoming in the editorial calendar
WIRELESS CHARGING
Aug 2025
MANAGING MIXED FLEETS
Oct 2025
Ask us about editorial contribution
Last Week's Most Read
edition #1234 - 12 June 2025
Upcoming industry events …
Australian Forklift Championship
July 22-24, 2025 - Sydney, Australia
The Health and Safety Event Asia
November 11-13, 2025 - Singapore, Singapore
Retail Supply Chain & Logistics Expo London
November 12-13, 2025 - London, United Kingdom
More Events
Movers & Shakers
Pete Stanislawczyk Pete Stanislawczyk
Pete Stanislawczyk
Chief executive officer, East Penn Manufacturing
Christy Weeber
President, East Penn Manufacturing
Manojit Acharya
APAC vice president, Jungheinrich
David Campbell
Senior VP direct sales and marketing, Daifuku Intralogistics America
Forklift Diaries
From the forum discussions …
"Toyota 8FGCU30:Backfiring - Thanks Scott_ from Pennsylvania. Normally most backfire problems come from some problem with the ignition system l would check..."
Scott_, United States
Read & Post in our Forums
Movers & Shakers
Pete Stanislawczyk Pete Stanislawczyk
Pete Stanislawczyk
Chief executive officer, East Penn Manufacturing
Christy Weeber
President, East Penn Manufacturing
Manojit Acharya
APAC vice president, Jungheinrich
David Campbell
Senior VP direct sales and marketing, Daifuku Intralogistics America