Cat / Mitsubishi with H21 - additional gas injector dont work. Discussion about troubleshooting Caterpillar

Caterpillar GP25NM:
Cat / Mitsubishi with H21 - additional gas injector dont work

Hello. I have a problem with CAT GP20CN with H21 engine, same as in many different forklifts CAT, Mitsubishi and Nissan. Fuel = LPG, engine have full electronic with 2 injectors: main , and additional what must work when acceleration pedal going down.

In my machine this additional injector dont work and its still closed, engine intermit when accelerate becouse dont have enougth fuel. Injector (valve) is OK, work when we give 12V. It have 2 cables: white is mass, and green/yelow is signal from ECU. Cables to ECU are OK, but we dont have signal from ECU. Any fault codes. MAF sensor is replaced and still same. Acceleration pedal position sensor was check and it is OK too.

Where is a problem? What signal ECU need to open this valve?

Posted 19 Dec 2018 20:46
Modified 19 Dec 2018 20:51 by poster
Discussion started by kor1
Poland

Post a Reply Report this post

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.