Error Code 216 displayed on Dash - Technical Troubleshooting discussion in Forkliftaction's forums

TCM FB18-7:
Error Code 216 displayed on Dash

Hello

I'm Working on TCM FB18-7 48v and have error code 216 displayed on the dash. check the flash codes on the driver board and give me code 59 CSLU problem. I have changed the sensors with new ones. I have also tried swapping sensor with others on the liftruck to see if the code Changes. still the same code. changed the wiring harness as precaution because problem is intermittent. I still get the error code.

at this point I believe it may be the board.

Can anyone give me a hand?

any help is much appriceiated

Posted 8 Mar 2018 04:08
Discussion started by Hoffy
Ontario, Canada

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

Hello Hoffy,

you must buy Service Manual Book.

Is not possible, to repair TCM without wiring diagram and Error code.

Regards

Posted 16 Mar 2018 06:09
Reply by stefano_tcm
ITALIA, Italy

TCM Forklift spare parts
tcmricambi@gmail.com

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.