Raymond 10F40L:
code C28

hi, i have a c28 code in a walkie palett model 102t-f45L, unfortunatelly have no serv.man. do somebody can give some advise about it? i heard it is just a inproper turn off procedure.
  • Posted 3 Sep 2008 11:38
  • Discussion started by roldann
  • nuevo leon, Mexico
Showing items 1 - 1 of 1 results.
The most common thing is that the red on/off toggle switch is turned off when you are turning the truck on with the keyswitch or the keypad on the handle. I have had a few trucks get this code when trying to lift. It turned out the truck had one bad battery in the battery pack. If the truck has a battery pack with four 6 volt batteries in it you can test them one at a time with a volt meter. Leave them all connected and check the voltage right at the terminals one battery at a time while operating the lift or travel and see if the voltage drops way down. I have seen this more with the Champion/GNB sealed batteries but have also seen it with the non sealed ones. Good luck.
  • Posted 16 Sep 2008 13:05
  • Reply by kurt_k
  • Wisconsin, United States

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Global Industry News
edition #1228 - 1 May 2025
There is simply no ignoring the push for a greener, more sustainable materials handling equipment industry as manufacturers and customers alike seek eco-friendly solutions to reduce or eliminate carbon emissions... Continue reading
Maersk opens French warehouse Hauts-de-France, France
Upcoming industry events …
May 09-11, 2025 - Bangalore, India
October 21-23, 2025 - Panama City, Panama
July 15-17, 2025 - Hong Kong, Hong Kong
Upcoming in the editorial calendar