Showing items 1 - 7 of 7 results.
Cheers ed,i'll put that one in the bank
tugmaster, it didn't come through, but if you wrote it out like "mog at price1844 dot fsnet dot co dot uk" or added it to your profile, then you might have people able to connect to you...
Hi margus. im not sure if this comes out but here goes
[email address removed]
Tugmaster,
can I have your contact e-mail. I have some additional questions.
oh iforgot a few things.keep e healthy supply of steer position potentiometers,you will need those when the truck starts surging.when you find the truck wonders all over the place when driving replace the steer taco generator.04 is probably a broken wire between the hydraulic lever and the tiller board,thats common.07 is probably a loose wire between the combi and the mdi although sometimes it can be between the eps controller and the combi. apart from that its a nice machine!!!
hi margus. im guessing that machine is similar to a hyster rp2.0 in which case its got azappi eps controller on it.code 79 or al79 means incorrect start,but dont take that too literaly.when does this fault occur?if the truck is used in moderatly bumpy conditions you will have a load of trouble with connectors comming loose ,wires breaking inside the sheathing,components shaking loose on the eps controller,main contactor contacts,keyswitch wires braking...to name but a few
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.