Clark NOT SURE OLD:
Electric error code 15

My forlklift will not move. The display show error code 15. Any help?
  • Posted 16 Feb 2008 05:31
  • Discussion started by ProPack
  • Missouri, United States
Clay Gregorc
Showing items 1 - 4 of 4 results.
Battery defect
  • Posted 15 Apr 2008 06:25
  • Reply by johngen
  • NB, Netherlands
Email harlekein@hotmaildotcom and djdotdj@kpnmaildotnl
As suggested,check the battery voltage,and check the main power fuse,as well.
  • Posted 16 Feb 2008 15:25
  • Reply by Truck_Tech
  • United States
When I parked the truck it was reading 90%. If the battery is low, any ideas on how to get it to the charger? Thanks.
  • Posted 16 Feb 2008 06:25
  • Reply by ProPack
  • Missouri, United States
Clay Gregorc
If the truck has GE EV-100 control, -15 is battery voltage too low.
Should have 1.95 volt per cell or higher. Or if the truck was set for let's say 48 volt and you tried a 36 volt battery, 15 would be displayed. Sounds like the battery needs charged at the very least.
  • Posted 16 Feb 2008 06:18
  • Reply by carl_v
  • Pennsylvania, United States

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.

Latest job alerts …
Upcoming industry events …
May 21-23, 2025 - Guangzhou, China
June 04-05, 2025 - Frankfurt, Germany
September 16-18, 2025 - Dar Es Salaam, Tanzania
Movers & Shakers
Jospeh E Creed Jospeh E Creed
CEO, Caterpillar Inc
Secretary general, European Rental Association
Chairman of the Board of Directors, UgoWork
vice president, Investor Relations, Konecranes