Step on Platform error - Technical Troubleshooting discussion in Forkliftaction's forums

Yale NR040ADNS24TE09I:
Step on Platform error

Our standup, S/N B81501570V will not move or adjust forks because it will not recognize when someone stands on the platform. It powers on, but nothing else. I checked inside the panel and the foot pedal is flipping the relay as for as I can tell. Any ideas what else I can try?

Thanks

Posted 11 Sep 2014 22:59
Discussion started by phil_n
Florida, United States

Post a Reply Report this post

Showing items 1 - 1 of 1 results.

Sort messages by:

do you have power going to the relay?if so how much?this relay should be a micro switch more then likely a roller switch make sure it is getting pushed down enough to send a signal do this by pushing it down with a small screw driver.thease switches do go bad,

Posted 7 Dec 2014 16:12
Reply by wrenchman
New Jersey, United States

Post a Reply Report this post

Post your Reply

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

Having trouble using the Discussion Forums? Contact us for help.