Discussion:
fault t-226

Frequently stopping no forward and reverse.what i need to change?
  • Posted 22 Apr 2015 06:10
  • By wills_b
  • joined 22 Apr'15 - 3 messages
  • doha, Qatar
Showing items 1 - 2 of 2 results.
Thanks,
I suspected the microswitch for forward and reverse then i changed with new microswitch only because the complete pcb board was expensive.
Fault was disappear and okay.
  • Posted 24 Apr 2015 02:55
  • By wills_b
  • joined 22 Apr'15 - 3 messages
  • doha, Qatar
Linde L16 trucks: there were different generations and types, so the serial No would be usefull.
If it's 131 series, as I presume, you have the problem either with the potentiometer or with the microswitches in the tiller head.
You should disassemble the tiller head, and you'll find the pot connected to the printed board, and the row of small switches surrounding the plastic axle.
Check them.
Eventually check the wires around.
  • Posted 23 Apr 2015 18:30
  • By Karait
  • joined 21 Jun'09 - 355 messages
  • Poland
I know your deepest secret fear...
J.M.

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.

Fact of the week
Brussels Airport in Belgium, Europe is the world's largest sales point for chocolate, with over 800 tonnes of chocolate sold annually. This averages out to about 1.5 kilograms sold every minute.
Fact of the week
Brussels Airport in Belgium, Europe is the world's largest sales point for chocolate, with over 800 tonnes of chocolate sold annually. This averages out to about 1.5 kilograms sold every minute.