Hi, I have a problem with a Linde H35D, mod. 393
when I use the control levers engine revs up, but when I step on the accelerator the forklift moves slowly and the engine does not speed up.
Any ideas what the problem is and how to solve it?
Showing items 1 - 6 of 6 results.
I am also having almost the same issue but mine comes with an error code T236,not reving up so doesn't drive but hydraulic works,any help please
You have to calibrate the accelerator pedal.
hi am having the same problem and I have already changed the potentiometer
any other suggestions that I can check
people are talking about a o ring on hyd cap
but my hydraulics works fine when lifting etc
regards
craig
I'ld start with the cables harness on traction potentiometer (located along the traction pedals).
There should be 4-pin plug on poti.
If it's disconnected or faulty, you'll have no reaction on engine and no error on the display.
Let me know.
Hi,
No there is no error codes.
Any error codes on the display?
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.