I'm trying to calibrate the steering on this unit, in the calibration mode you set the steering pot to center or +/- 0.1 degree. An X at the lower right corner of the screen should change to a green check mark. It will not change to the check mark no matter what I do. I have ohmed the wires and checked voltages multiple times and found no problems. does anyone have any experience with this problem. Any help would be appreciated.
Showing items 1 - 1 of 1 results.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.