Originally steer amp was burnt up and was giving a code G3 and G4. Changed steer amp then gave a code G2. After much trouble shooting here is what was found. The cable leads from the steer amp you normally put A1 wire on terminal 1 and A2 wire on terminal 2. What we found out is the cable were labeled wrong. Had to put wire A2 on terminal 1 and wire A1 on terminal 2 on the steer motor to get it to work right.
Just passing along the information.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.