I have been through a lot of troubleshooting. I now have a LX Handset with the EV100/200 cable. I cannot get the handset to power up. Tried key off and key on holding down the CONT, but nothing. I tested the voltage on the pins in the Forklift but I cannot find any reference online on what voltage the test pins should have. 7 pins have no power. The others range from 0.23v to 0.905v. Does anyone have a diagram or list of what power should be on the test pins on the Forklift? I am assuming none of the power readings I am getting are enough to power the handset. Thank you for your help.
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.