Got a wave 60 with "cycle hands" on display. Cycle hands and still showing same message. Cleaned the sensors by both grips and nothing. Any thoughts?
Showing items 1 - 4 of 4 results.
FYI in case others search this issue. I rolled the dice and sprayed contact cleaner into the tiny holes where the hand sensors are (Not sure if these are optical or sonic). Gave both sides a decent squirt and then let it dry for 6 hours before starting it and its all good. Problem solved.
Any tips? I'm very remote and won't see a service tech for a long time.
Hi Crownie, my WAv60 is doing the same thing. All controls seem to be centred. How can I clean the optic sensors? Can I spray contact cleaner in the tiny little holes?
one of the pots will not be at nuetral at startup
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.