Good Morning,
I am working on a Komatsu as stated above. When brought into the shop it would not pull in forward when cold, but after a few minutes of "warming up" it would pull very well. We checked the transmission pressures and were getting a 30-40 PSI fluctuation at idle. So we removed the Valve body and found the the main pump spool damaged. We replaced the valve body and it cured the light on the dash. BUT the forklift still does not pull at all when cold. Any ideas?
Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.
If you are having trouble using the Discussion Forums, please contact us for help.