Hyster H80XM LPG - Maintenance & Troubleshooting discussion in Forkliftaction's forums

Discussion:
Hyster H80XM LPG

Hi, I am having a issue with the forklift stumbling. Starts and runs fine but at idle it will stumble like it's about to die for about 1 second, then run fine again. This happens about every 5 to 10 seconds. If I give the unit throttle it will rev up, but it still stumbles, about every 5 to 10 seconds at higher RPM's.

Thanks in advance for the help.

Posted 22 Nov 2019 11:06
By Cainsable
joined 22 Nov'19 - 2 messages
California, United States

Post a Reply Report this post

Showing items 1 - 3 of 3 results.

Sort messages by:

some of these units have what they call a dashpot on the throttle.
if it is not adjusted correctly it can allow the throttle to drop too low or have a surge in it like what you are describing.
On the higher rpm's i'm not sure what that might be unless it has a mechanical governor on it, if thats been tampered with it might be out of adjustment causing that surge.

Posted 3 Dec 2019 16:53
Modified 3 Dec 2019 17:03 by poster
By swoop223
joined 23 Mar'12 - 3,691 messages
North Carolina, United States

You've been swooped!
swoop223@gmail.com

Post a Reply Report this post

Serial number is K005D02373X. It is run by propane(LPG). Thanks.

Posted 30 Nov 2019 04:31
By Cainsable
joined 22 Nov'19 - 2 messages
California, United States

Post a Reply Report this post

Serial number please it will help to be able to work out what model fuel system is fitted

Posted 23 Nov 2019 05:25
By lifter01
joined 4 Jul'09 - 462 messages
West Yorkshire, United Kingdom

Post a Reply Report this post

Post your Reply

Forkliftaction accepts no responsibility for forum content and requires forum participants to adhere to our rules of conduct. Click here for more information.

If you are having trouble using the Discussion Forums, please contact us for help.