P=pump
4F is incorrect start.
It could be that the calibration from p-lift sensor (or other analog signals)is off, therefore when starting up the machine's pump controller will give a start-up error since it's out the "safe" range.
Hi,
I need the manual also as I'm facing the error P4F, Can you please share with me. Will be thankful to you.
All potentiometers can be calibrated in VASS settings menu. e-mail?
Hoist'er123, Please put your email in profile.
Does anyone know factory set service level password? Can accelerator pedal be calibrated using display?
thank you very much.
ok i will check
m4f is an incorrect start, either driving direction is not in neutral, or accelerator pedal and or brake pedal is not in rest-position before (seat switch) and keyswitch are activated.
If the truck is active, also the seat switch must be closed before accelerator and/or direction switch is closed, if not> truck will give incorrect start (as the name implies).
Same goes for when the truck is in SRO Static Return Off, all inputs must be neutral.
Good evening please the problem
what is m4f what is the solution
Thank you
Bonsoir s'il vous plait le probleme
que vous m4f c'est quoi la solution
Merci
Thanks for your attention Speedfreak
datobasheleishvili1@
gmail
PDF SBR e12 and e4 are nc.
but The code is still on the dyspley.
and MF4
How to make sure that the Accelerator is damaged.
Accelerator modell MTF13 comesys
PDF SBR switch is related to the battery-door switch.
NC switch on right side of machine on battery-door.
To prevent driving when battery-door is openend.
Very often the wiring of this switch is getting between door and chassis, resulting in broken wiring.
For testing purpose, just remove switch, connect the 2 wires so master will see this as a NC contact.
If unsuccesfull, wiring is broken.
Connection on pumpcontroller E12, wire 68 switches to E4 common wire 222 (A trough E)
Good luck!
MF4= wrong traction request sequence
M=master
4F = incorrect start.
After switching on keyswitch either driving direction is not in neutral or acceleration pedal is not in zero position.
Calibrate acceleration pedal if problem exists.