Showing items 105,441 - 105,460 of 111,513 results.
Technical Troubleshooting
Posted:
26 May 2008 19:24
by
Futs
Beste John,
Ik heb een Atlet in de werkplaats met een Zapi controller en een MDI klok.
MDI geeft foutcode...
Design & Engineering
Posted:
26 May 2008 13:49
by
ian_p
Hi Gavin, the model in the picture is a 352 H40-45, this has now being replaced by the 394
Regards...
Technical Troubleshooting
Posted:
26 May 2008 02:10
by
rolo
I have old hyster which i believe to be an E30b but plate has been removed. have had a lot...
Design & Engineering
Posted:
26 May 2008 00:56
by
Gavin
Just snapped this machine today. The F40 is most likely a fleet number for the area, there is no mention...
Technical Troubleshooting
Posted:
25 May 2008 20:57
by
kevin_k
give us more info please. serial number. fuel type
Technical Troubleshooting
Posted:
25 May 2008 06:28
by
frodefylk
Hello
I have a mitsubishi FB20Kt - 3wheel - 1999mod - dc.
The machine has no error when turning the ignition key, but...
News & Perspectives
Posted:
24 May 2008 21:20
by
proshadetree
They have been opening up auto batts for years.Flush them out change shorted cells new acid then return to service.The...
News & Perspectives
Posted:
24 May 2008 21:15
by
proshadetree
Thanks for the heads up.I like to fell over when Isaw this.Most of the cats sold here are IC.For electric...
Technical Troubleshooting
Posted:
24 May 2008 10:47
by
Liftdoctor
Look for shorts in the mast cable. Look for shorts in the cable that runs from the carriage through the...
Design & Engineering
Posted:
24 May 2008 08:28
by
justinm
i wouldnt go pressure washing any modern forklifts
including IC trucks
ive had problems where the customer pressure washed the...
Technical Troubleshooting
Posted:
24 May 2008 02:59
by
carl_v
-99 means that the service reminder interval has been tripped. With a GE Handset, set Functions 19 and 20 both...
Design & Engineering
Posted:
24 May 2008 00:02
by
JDBurton
honestly all are good trucks. make the decision based on the local dealer support and what your budget is. Raymond...
News & Perspectives
Posted:
23 May 2008 23:59
by
JDBurton
I was sent some of that magic elixir once from a vendor and it was useless. As far as cutting...
News & Perspectives
Posted:
23 May 2008 23:58
by
JDBurton
Cat/Mits used Junghienrich to build the pallet jacks since 2004 or so. When the deal with raymond ended on the...
Design & Engineering
Posted:
23 May 2008 23:49
by
LiftDuck
You need to add Crown to the mix... Crown has a good machine and their dealers are a lot easier...
Design & Engineering
Posted:
23 May 2008 21:43
by
JonG
I'd go with the Raymond, better dealer support in NC. Jungheinrich is still new in the US, and I'd worry...
News & Perspectives
Posted:
23 May 2008 17:43
by
proshadetree
When did Junghienrich and Cat team up?Just worked on a pallet jack that was full of Junghienrich labels.
Technical Troubleshooting
Posted:
23 May 2008 07:39
by
dan_s
WILL MOVE WITH NO LOADS BUT WILL NOT SPIN TIRES WHEN UP AGINST SOMETHING,OR WON'T MOVE WITH HEAVY LOAD,NEED HELP
Design & Engineering
Posted:
23 May 2008 05:35
by
jeff_j
If you don't mind me asking....why do you prefer that one?
Design & Engineering
Posted:
23 May 2008 05:31
by
AndyPandy
Junghienrich
Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.