Discussion:
Saft power charger model SMC36C, A-h Adjustment.

hi, All. saft power model: SMC36C-181116BG-01
have a charger wich is throwing a code FFF, Accordin to manual it means a protection from overvoltage / overcurrent. Input voltage arrangment and Supply are good. What i found, is that battery beeing charged is 1000 A-h an charger is 750 A-h Rated. manual says that control card can be adjusted from 65% to 200% of the namplate. card have 3 multilpe deep swithes, sw6, sw7 and sw8
(each one have 8 microswitches). I belive one of these can be to used to do this. (card p/n : 4111-6612414-45)
Do someone can help me for the table for adjustment?
Any advice ?. Thanks in advance
  • Posted 14 Mar 2012 05:53
  • Modified 14 Mar 2012 05:55 by poster
  • Discussion started by roldann
  • nuevo leon, Mexico
Post a ReplyReport this post
Showing items 1 - 1 of 1 results.
I realize that this is long past being helpful, but maybe it'll be helpful to someone else. Due to just having one in our shop, the Saft Power Systems chargers as well as the V Force chargers are made by GNB. The one that we had in particular matched up with the SCR FLX series chargers.

As for the question asked, that's not a good code to see. It means:

Fatal failure of the charger (Overvoltage or Overcurrent protection or multifunction of Start Stop signal).
  • Posted 22 Jan 2022 06:06
  • Reply by ForkliftAmerica
  • Missouri, United States
Post a Reply Report this post

Having trouble using the Discussion Forums? Contact us for help.

Forkliftaction.com accepts no responsibility for forum content and requires forum participants to adhere to the rules. Click here for more information.

FOR SALE ON MACHINERY-ONQ

|
Reddot CPQYD45XRW57
Svetruck1260-30
Denmark
DoosanB30X
Netherlands

Special Feature

Big challenges and big opportunities for manufacturers in Europe

Inside Forkliftaction

Two recent trends are again evident this week. The first is the rise of refurbished equipment as we report on two manufacturers offering certified used equipment. That, of course, is partly a result of supply shortages and delays for new machines.
The second is the roll-out of new models, which...Continue Reading

Next Editorial Features

• MH MANUFACTURERS IN EUROPE - 12th May
• SAFETY INNOVATIONS - June
Ask us about editorial contribution

Inside Forkliftaction

Two recent trends are again evident this week. The first is the rise of refurbished equipment as we report on two manufacturers offering certified used equipment. That, of course, is partly a result of supply shortages and delays for new machines.
The second is the roll-out of new models, which...Continue Reading

FOR SALE ON MACHINERY-ONQ

|
Bada 10SE
Bada10SE
Italy
Toyota8FGU32
Canada Ontario
LindeH80D
Malaysia
NaganoNUL120
Japan
Bada10M
Italy

Special Feature

Big challenges and big opportunities for manufacturers in Europe

Next Editorial Features

• MH MANUFACTURERS IN EUROPE - 12th May
• SAFETY INNOVATIONS - June
Ask us about editorial contribution

FOR SALE ON MACHINERY-ONQ

|
Reddot CPQYD45XRW57
MoffettM8-55.4
Canada Ontario
ReddotLT20
China
Load Lifter4430-5C
Canada Ontario
BaoliCPCD70
Malaysia

Special Feature

Big challenges and big opportunities for manufacturers in Europe

Inside Forkliftaction

Two recent trends are again evident this week. The first is the rise of refurbished equipment as we report on two manufacturers offering certified used equipment. That, of course, is partly a result of supply shortages and delays for new machines.
The second is the roll-out of new models, which...Continue Reading

Next Editorial Features

• MH MANUFACTURERS IN EUROPE - 12th May
• SAFETY INNOVATIONS - June
Ask us about editorial contribution