1. Home
  2. Forums
  3. Report post

Report this forum post

Code 165 isn't in the manual. Code 66 is FIELD FET CURRENT EXCEEDED EXPECTED CURRENT LIMIT. Check drive motor connections, resistance (motor armature to field & both to chassis), shorts on all suppressors Inc fan/horn/etc.

Check 36v at CA401-18 with seat switch open.

If all good, could be a controller.
  • Posted 6 Jan 2017 09:08
  • By techno_nz
  • joined 9 Aug'13 - 138 messages
  • Canterbury, New Zealand

This is ONLY to be used to report flooding, spam, advertising and problematic (harassing, abusive or crude) posts.

Indicates mandatory field
Movers & Shakers
Andries Retief Andries Retief
Andries Retief
Chief development officer, DHL
Michael Simms
Director, ICHCA Australia
Dominiek Valcke
CEO, TVH
Chad Davis
Sales and operations director, Logitrans A/S

Showcased in the Virtual Expo

Fact of the week
At the opening ceremony of the Sydney Harbour Bridge in 1932, marching bands were instructed to walk out of step as they crossed the bridge. This unusual directive was given as a precaution due to concerns about the bridge's structural integrity during its early use.